University of Bielsko-Biała, Bielsko-Biała, Poland, EU
Structure and Corrosion Resistance of the End of Combustion Chimneys - INVITED LECTURE
13:45 - 14:00
D2
ŠVANTNER Michal
University of West Bohemia, Pilsen, Czech Republic, EU
Detection of Cracks by Infrared Nondestructive Testing Methods
14:00 - 14:15
D3
MUZIKA Lukáš
University of West Bohemia, Pilsen, Czech Republic, EU
Use of IRNDT Evaluation for Crack Detection induced by Cyclic Loading
14:15 - 14:30
D4
MERTOVÁ Andrea
Institute of Thermomechanics of the CAS, Prague, Czech Republic, EU
Comparison of Properties and Behaviour of Selected Systems of Thin Film – Substrate with TiSiN, AlCrN and AlTiN on Samples and Selected Cutting Tools
14:30 - 14:45
D5
RUTKOWSKA Izabela
AGH University of Science and Technology, Cracow, Poland, EU
Obtaining Alumina Coatings on Steel Substrates by Electrodeposition and Sol-gel Methods
14:45 - 15:00
D6
DEMIDOV Vitali
PILSEN TOOLS s.r.o., Pilsen, Czech Republic, EU
Hard Machining Tests Using End-Mills with TiSiN, AlCrN and TiAlN Thin Films
15:00 - 15:15
D7
LANGOVÁ Šárka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Corrosion Inhibition of Stainless and Mild Steel by Imidazolium-based Compounds in Acids
15:15 - 15:30
D8
DE CRESCENZO Carmen
University of Campania “Luigi Vanvitelli”, Department of Engineering, Aversa, Italy, EU
Modeling of Hvof Thermal Spray Deposition of Nitinol Coating: Effect of Spraying Process Parameters on Gas and Particles Properties and Coating Quality
15:30 - 16:00
COFFEE BREAK
16:00 - 16:15
D9
HOUDKOVÁ Šárka
Research and Testing Institute Pilsen, Pilsen, Czech Republic, EU
Characterization of Flame Sprayed Abradable Seal NiCrAl-Bentonite Coatings
16:15 - 16:30
D10
PETR-SOINI Jaroslav
ŠKODA AUTO a.s., Prague, Czech Republic, EU
Influence of Heat Treatment on Al-Si Coating Chemical Composition
16:30 - 16:45
D11
ŠTĚPÁNEK Ivo
Institute of Thermomechanics of the CAS, Pilsen, Czech Republic, EU
Nanoindentation Methods of Evaluation of Mechanical Properties and Behaviour and Complex Application for Evaluation of Technology and Degradation Surfaces
16:45 - 17:00
D12
ROHAN Pavel
Czech Technical University in Prague, Prague, Czech Republic, EU
Alternative Low-cobalt Powder for PTA Hardfacing
17:00 - 17:15
D13
IJAZ Aatif
Koç University, Chemistry Department, Rumelifeneri Yolu, Istanbul Sariyer, Turkey
Electrochemical Deposition of Fe-P Thin Films Reinforced by Inhibitor Loaded/unloaded Silica Nanoparticles
20:00 - 23:00
SOCIAL EVENING
Date: May 24, 2018
09:00 - 09:15
D14
ŠTĚPÁNOVÁ Lucie
Institute of Thermomechanics of the CAS, Prague, Czech Republic, EU
Optimalization of Evaluation of Initiation of Temperature Ageing Processes of Selected Cable Isolation
09:15 - 09:30
D15
KOCLĘGA Damian
AGH University of Science and Technology, Cracow, Poland, EU
Laser Cladding of an Inconel 686 for High-temperature Corrosion Protection
09:30 - 09:45
D16
JEDRZEJCZYK Dariusz
University of Bielsko-Biała, Bielsko-Biala, Poland, EU
Influence of the Heat Treatment on Functional Properties of Hot-Dip Zinc Coated Fasteners
09:45 - 10:00
D17
PIETRZAK Kornel
Koszalin University of Technology, Koszalin, Poland, EU
New Trends of Porous Coatings Obtained by Plasma Electrolytic Oxidation
10:00 - 10:15
D18
HRUŠKA Matěj
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
The Influence of Controlled Steel Surface Oxidation on NIR Light Absorption in Inert Atmosphere
10:15 - 10:30
D19
ŠIMEČKOVÁ Lucie
Institute of Thermomechanics of the CAS, Prague, Czech Republic, EU
Verification of Possibilities of Evaluation of Changing of Polymeric Surface Properties and Behaviour Evoked by Sun Radiation and Temperature Loading
10:30 - 11:00
COFFEE BREAK
11:00 - 11:15
D20
STEPNOV Alexey
Center for Plasma Spraying, Vladimir, Russian Federation
The Influence of Plasma Spraying Technology on the Efficiency of Al2O3 Coatings
12:00 - 14:00
LUNCH
Date: May 25, 2018
09:00 - 09:15
D21
STRACHOTOVÁ Kristýna Charlotte
University of Chemical Technology, Prague, Czech Republic, EU
Protection of Lead in Acetic Acid Containing Air by Means of Corrosion Inhibitors
09:15 - 09:30
D22
VAGGE Shashikant
College of Engineering Pune, Dept. of Metallurgy, Pune, India
Development of Thermal Barrier Coatings and Investigation of their Hot Corrosion Performance
09:30 - 09:45
D23
UKHINA Arina
Institute of Solid State Chemistry and Mechanochemistry, Novosibirsk, Russian Federation
Metal Coatings on Diamond Crystals by Rotary Chemical Vapor Deposition and Spark Plasma Sintering
09:45 - 10:00
D24
VOSTŘÁK Marek
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
Prolonging Lifetime of Milling Tools by Laser Cladding of Wear Resistant Coatings
10:00 - 10:15
D25
TAVSANOGLU Tolga
Mugla Sitki Kocman University, Mugla, Turkey
Synthesis and Characterization of Nanocomposite WO3-SiO2 Coatings by Sol-Gel Dip Coating Technique
10:15 - 10:30
D26
MADADI NAJAFABADI A. Hossein
Mobarakeh Steel Company, Isfahan, Iran, Islamic Republic of
A Numerical Study of Abrasive Damage of Iron Ore Pellets during Handling in Iron-making Plant
